Name: Festool Rubin2 Multi-Jetstream2 Sandpaper for 6" (150mm) Sanders
SKU: IS340905034911
Availability: InStock

No products in the cart.

Festool Rubin2 Multi-Jetstream2 Sandpaper for 6″ (150mm) Sanders

Home
Festool Rubin2 Multi-Jetstream2 Sandpaper for 6″ (150mm) Sanders

Warning: Undefined array key 0 in /www/wwwroot/steeltrooper.com/wp-content/themes/Closet-260825/woocommerce/content-single-product.php on line 58

Festool Rubin2 Multi-Jetstream2 Sandpaper for 6″ (150mm) Sanders

In Sandpaper

~~$42.00~~ $33.60

SKU: IS340905034911

Availability: In stock

Key Features

Built for Wood These Festool sanding discs use Rubin 2 abrasive made specifically for wood materials, so they cut cleanly through hardwoods, softwoods, wood composites, and veneers without loading up as quickly. 48-Hole Dust Control The 48-hole Multi-Jetstream 2 pattern helps pull dust away from the work surface. That means cleaner sanding, less clogging, and better finish quality between grit steps. 50-Disc Pack The hook and loop backing swaps fast and keeps downtime low. With 50 discs in the box, you are set up for repeat sanding work instead of stopping to ration paper.

Overview

The Festool STF D150/48 P220 Rubin 2 Sanding Abrasive 50-Pack, model number 575193, is a 6-inch sanding disc set built for finish sanding and intermediate wood surface preparation. This is a sanding disc designed for wood sanding and paintwork or oil finish prep. If you run a Festool 150 mm sander and need a fine grit that leaves a clean surface before finish, this is the right kind of abrasive to keep on hand.

What matters here is not just the P220 grit, but the fact that this is Rubin 2. Festool positions Rubin 2 as a wood-focused abrasive, and that matters because wood fibers, resin, and dust can load ordinary paper fast. Rubin 2 is designed to shed wood fibers and resist clogging better, which helps it stay cutting longer. Festool also states up to a 30% faster removal rate and up to 30% longer sheet life than the original Rubin abrasive. On the bench, that means less time fighting dull paper and fewer disc changes when you are working through grit progression.

The Festool STF D150/48 P220 Rubin 2 Sanding Abrasive uses a 6 inch, 150 mm disc format with a 48-hole pattern for Multi-Jetstream 2 dust extraction. That hole pattern is a big part of why these discs work well in real use. Better dust pull means the abrasive face stays clearer, the sanding pad runs cleaner, and the finished surface is more consistent. If you are sanding doors, face frames, trim, veneered panels, or furniture parts, that cleaner cut can save time on your next pass.

The backing uses a hook and loop attachment method, so disc changes are quick and simple. That sounds basic, but when you are stepping through multiple grits on a finish job, fast changes matter. You spend less time peeling off worn discs and more time sanding. The paper backing and closed abrasive grain coat are aimed at efficient wood sanding, especially where you want a refined surface without jumping straight to ultra-fine finishing paper.

In practical use, this disc is a good fit for preliminary and intermediate sanding for paintwork or oiling, especially in woodworking, finish carpentry, cabinet work, and furniture production. P220 is the kind of grit you reach for when the surface is already fairly close and you want to refine it before finish, not hog off heavy stock. It is better suited to surface prep and finish quality than aggressive material removal.

Compatibility is straightforward and important. Festool lists this abrasive as suitable for the ES 150, ETS 150, ETSC 2 150, ETS EC 150, LEX 150, and HSK-D 150. If you are already in the Festool 150 mm sanding platform, that makes this an easy match. The 48-hole disc pattern and hook and loop interface are the details to verify, and in this case both are called out clearly.

The abrasive mineral is aluminum oxide, which is a proven choice for wood sanding because it balances cut speed, finish quality, and disc life. Combined with the dust extraction pattern and the Rubin 2 formulation, it is aimed at users who care about repeatable results, not just getting through a single sheet of paper as cheaply as possible.

Who should buy this? Woodworkers, cabinet installers, finish carpenters, painters doing prep work, and serious DIY users who already own a compatible Festool 150 mm sander. If your work is mostly wood and you want a fine-grit Festool disc that stays useful longer and leaves a cleaner surface heading into finish, the Festool STF D150/48 P220 Rubin 2 Sanding Abrasive makes a lot of sense.

Cleaner Sanding on Wood Surfaces

For finish work, a good sanding disc is about control as much as cut speed. This one is tuned for wood, so it helps refine the surface without leaving you fighting loaded paper halfway through the job.

P220 grit is well suited for intermediate and finish prep on wood surfaces
Designed for hardwoods, softwoods, composites, and veneers
Closed abrasive grain coat supports a consistent scratch pattern

Fast Disc Changes, Less Downtime

When you are moving through grit steps, wasted time adds up. The hook and loop backing keeps disc swaps quick so you can keep the workflow moving from prep sanding to finish sanding.

Hook and loop attachment method for fast abrasive changes
50-pack is practical for repeat shop work and production sanding
6 inch disc format matches common Festool 150 mm sanders listed for compatibility

Dust Extraction That Helps the Finish

Dust collection is not just about cleaner air. On a sander, better dust removal helps the disc cut more evenly and keeps loose debris from riding between the abrasive and the workpiece.

48-hole layout supports Festool Multi-Jetstream 2 dust extraction
Reduced clogging helps maintain cutting performance longer
Cleaner abrasive contact supports better surface quality

What’s in the Box

(50) Festool STF D150/48 P220 Rubin 2 sanding discs

Key Specifications

Grit	P220
Diameter	6 in (150 mm)
Disc Type	Sanding disc
Attachment Method	Hook and loop
Abrasive Quality	Rubin 2
Abrasive Material	Aluminum Oxide
Dust Collection Holes	48
Made In	Germany

Compatibility

Sander Size Fits 150 mm, 6 inch Festool sanding platforms that use this disc size. Hole Pattern Uses a 48-hole Multi-Jetstream 2 pattern for dust extraction. Attachment Style Hook and loop backing for quick mounting on compatible sanding pads. Compatible Festool Sanders Suitable for ES 150, ETS 150, ETSC 2 150, ETS EC 150, LEX 150, and HSK-D 150.

Built For

Woodworking Finish Carpentry Cabinetry Furniture Making Paint Prep Oiling Prep Veneer Sanding Remodeling

Tool Nut’s Take

Festool STF D150/48 P220 Rubin 2 Sanding Abrasive Is the Right Disc for Fine Wood Prep

If you are sanding wood and already own a compatible Festool 150 mm sander, this is the kind of abrasive that earns its keep with cleaner cutting, better dust control, and less wasted time swapping clogged discs.

Who it’s for: Woodworkers, cabinet shops, finish carpenters, painters doing prep, and serious DIY users who want a fine-grit sanding disc for wood surfaces.
Why it stands out: Rubin 2 is purpose-built for wood, the 48-hole Multi-Jetstream 2 pattern supports strong dust extraction, and the 50-pack makes sense for anyone sanding regularly.
Worth knowing: This is a specialized wood abrasive, not a one-disc-for-everything option. It makes the most sense when you are using it on the Festool sanders it is designed to fit.

Common Questions

What material is this abrasive designed for? It is designed for wood materials, including hardwoods, softwoods, wood composites, and veneers.
What grit is this Festool sanding disc? This model is P220, which is a fine grit commonly used for intermediate sanding and finish preparation.
What size sander does it fit? It is a 6 inch, 150 mm sanding disc designed for compatible Festool 150 mm sanders.
Which Festool sanders are listed as compatible? Festool lists ES 150, ETS 150, ETSC 2 150, ETS EC 150, LEX 150, and HSK-D 150.